Engineering case
ENGINEERING CASE
The pipe chain conveyor is a continuous conveying equipment for conveying powder, small particles and small blocks of bulk materials, which can be transported horizontally, obliquely and vertically.
Positive pressure dense phase sending pump
Positive pressure dense phase conveying is also called sending tank or bin pump conveying. The conveying method uses gas pressure higher than 1kg and uses positive pressure to push materials through conveying pipelines, so it is often called high pressure system. The material gas ratio of the system is very high. The initial speed of this system is about 2 m/min starting speed, at the end of the higher about 20 m/s (except for full load transport), the pressure of the delivery pipeline is generally 2~3kg, at the end of the system pressure is almost zero. The system uses an air compressor as the power source, which is characterized by low conveying speed and less impact on the quality of the material.
Donggong Automation Equipment (Jiangsu) Co., Ltd.
Address: Hexi Electromechanical Industrial Park, Danyang City, Jiangsu Province
E-mail:sun@czglzz.com
Telephone:0519-83867299
Design and calculation software for pneumatic conveying ewm
Copyright©2024 Donggong Automation Equipment (Jiangsu) Co., Ltd.