BLOG
NEWS CENTER
Technology of Arch Breaking and Blocking Machine for Silo
Release time:
2022/01/15
Application of Arch Breaking and Blocking Machine Technology in Silo
1.Bin Arch Breaking and Blocking MachineIntroduction
For wetMaterial inCentrifuge,Reaction kettle,The outlet diameter of the silo (at the neck) tends to form an arch.,Crystallization or bridging,At this time, if you add aBin Arch Breaking and Blocking Machine, the bridge is not easy to form, MaterialThe stuck neck project will be solved.
2.Model of Arch Breaking and Blocking Machine for SiloPointsClass
According to the project requirements standard customization, various models.
| Equipment Model |
Material |
Power |
| QD-150 |
Carbon steel or stainless steel |
0.75KW |
| QD-200 |
Carbon steel or stainless steel |
0.75KW |
| QD-250 |
Carbon steel or stainless steel |
0.75KW |
| QD-300 |
Carbon steel or stainless steel |
1.1KW |
1. Usually by the body, in and out.FlangeThe driving device consists of three parts.
2. The driving device is composed of a motor, a reducer, and a base of the driving device. The motor and the reducer are integrated to make the driving device compact in size.
3,Bin Arch Breaking and Blocking MachinePrinciple
MachineWhen turning,The driving device drives the scraper to rotate along the side wall of the siloMovement,The scraper breaks the silo bridge to make the material blanking smoothly..
Arch and block breaking machine for 4. siloAdvantage
The types of arch can be divided into compression arch or wedge arch, mouse hole arch and adhesion arch. Compression arching is the compression of the powder and the reduction of the void ratio, which is caused by the increase of the strength of the powder itself. Wedge arches are arched due to the local force balance of granular materials. Adhesive arch is a strong adhesive material, due to water or moisture absorption or with static electricity, they not only adhere to the silo wall, but also by the consolidation pressure, consolidation time and arch.Bin Arch Breaking and Blocking MachineCan effectively solve the above problems, in addition to the above advantages, there are the following advantages:
1. Large carrying capacity, safe and reliable;
2. Strong adaptability, convenient installation and maintenance, long life;
3. Large torque, low power,;
4Good sealing, the shell is made of steel, the ends are connected with each other by flanges, and the rigidity is good;
Five,Bin Arch Breaking and Blocking MachineScope of application
Bin Arch Breaking and Blocking Machinein the centrifuge,Reaction kettle,SiloIn and outMouth,In the pipeline, can be installed and used.
1. The following figure shows the mixing blade at the bottom of the silo. The blade rotates, and the silo arch-breaking machine is installed at the blanking port. Material is wet material or powder can be.
Donggong Automation Equipment (Jiangsu) Co., Ltd.
Address: Hexi Electromechanical Industrial Park, Danyang City, Jiangsu Province
E-mail:sun@czglzz.com
Telephone:0519-83867299
Design and calculation software for pneumatic conveying ewm
Copyright©2024 Donggong Automation Equipment (Jiangsu) Co., Ltd.